Dispersed porous ZnO/ZnCo₂O₄hollow spheres were successfully prepared by annealing the precursor，which was obtained via a facile one-step solvothermal method without any templates or surfactants. The X-ray powder diffraction (XRD) measurement showed that the crystal phase of the sample was a mixture of ZnO and ZnCo₂O₄. The field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) images revealed that the as-synthesized porous ZnO/ZnCo₂O₄hollow spheres had an average diameter of about 850 nm and were constructed from a large number of primary nanoparticles. To demonstrate the potential applications of such porous ZnO/ZnCo₂O₄composites，the as-prepared products were used to fabricate a gas sensor that was then investigated for gas-sensing performances. Results of the test showed that this sensor had fast response kinetics to acetone at the operating temperature of 275℃，and a high response to 100 ppm acetone，one that was about 4 times higher than that of sensors based on ZnO/ZnCo₂O₄nanoparticles. The remarkable enhancement in the gas-sensing properties of the porous ZnO/ZnCo₂O₄hollow spheres was attributed to their unique structure.